Installing Portable Air Conditioners in The Car
The summer is coming and it’s time to start thinking about how you’re going to stay cool. One way that many people choose is by installing portable air conditioners in the car. Read on for more information on why this may be the best option for you, as well as some helpful tips and tricks.
There are two parts to installing portable air conditioners in the car, namely piping and un-piping portable air conditioner. When installing portable air conditioners remember to follow the following guidelines:
- Use duct tape or insulation tape to seal off any openings that are otherwise exposed. This is done to help maintain proper temperature control once the portable air conditioning unit is turned on.
- Ensure that the portable air conditioning unit is mounted securely on a flat and level surface such as your car’s roof.
- Never mount portable air conditioners on moving parts of your car’s engine like fan belts, water pump, etc. Mis-alignment can result in improper cooling or heating. This will cause damage to the portable air conditioner.
- Ensure that the portable air conditioning unit has been securely fastened in a way it cannot be accidentally removed while your car is moving or while you are driving. If it falls off, you will have a dangerous situation on your hands.
- Never set portable air conditioning units on your car’s side or rear. This can damage the portable air conditioner as well as cause injury to you and others if it rolls over someone.
- Never install portable air conditioners in an area where heat from the portable air conditioner will be exhausted directly into the driver’s compartment of your vehicle. Ensure that exhaust from portable air conditioners runs outside the vehicle.
- Ensure that the portable air conditioning unit has been turned off before you start un-installing the portable air conditioner. Failure to do so will cause injury to you and others as well as damage the portable air conditioner.
Related Post: Top 5 Cheap Portable Air Conditioners Under $100 In 2021
When installing portable air conditioners, ensure that you follow the instructions provided in the portable air conditioner user manual. If in doubt, consult a professional for help in installing a portable air conditioner in cars.
Once portable air conditioners have been installed on your car, you will need to ensure that they are turned off before driving. This is to avoid injury from unexpected contact with moving parts of the portable air conditioner.
Check portable air conditioners periodically to ensure that they are firmly mounted and securely tightened to avoid any unnecessary movement while the car is in motion. This will help prevent damage from vibration caused by road conditions or hitting bumps, etc. Inadequate grounding of portable air conditioners can also cause electrical shock which can result in injuries as well as damage to the portable air conditioners.
This article discussed portable air conditioning unit installation on automobiles. Remember to turn off portable air conditioners before driving and check periodically for loose mounting or tightening screws. In addition, never install portable air conditioners where exhaust fumes from the portable air conditioner will be ventilated into the driver’s compartment of your car.
Why it’s better than using a car-mounted air conditioner: There are plenty of reasons to install a portable air conditioner in the car, but the main one is that you can easily move it from room to room. This means that you can use it in your home and then take it with you when it gets too hot out, which means that you don’t have to heat up your car in the summer.
Another big attraction of portable air conditioners is that they’re more energy-efficient than a standard model. This isn’t just because they’re not constantly running either – it’s also because one single unit can cool and dehumidify any room that it’s placed in, meaning that you aren’t wasting energy cooling the air when it isn’t needed.
Finally, portable air conditioners are also very easy to install in your car, meaning that in just a matter of minutes you can have one in place and ready to use. Remember though that if you’re going to be driving for an extended period of time then you will need to have a second unit installed so that you can switch them off.
Tips and tricks for installation:
Installing your air conditioner in your car is actually very simple, provided that you follow the following guidelines. It will only take an hour or two at most, but it’s important to make sure that you’re doing it properly so that you can enjoy the most from it.
- Make sure that the window is open before installing the unit to allow for proper ventilation.
- Ensure that enough space has been left between your roof and ceiling so that there is room for a hose going out of the back of your car.
- The hose must be shaped in a ‘J’ shape to ensure that the coldest air is pushed into your car.
- Secure the unit with screws and keep it away from any moving parts.
- Drill through the casing of your car, not through the metal underneath so that you can reduce damage.
- You may want to upgrade the cord on your unit so that you don’t damage your car’s system.
- Keep the unit away from any heat source and power cables.
- Do not set it up in direct sunlight, which will cause the ice to melt rapidly.
- if you follow these guidelines then you should have no problems at all getting a portable air conditioner installed into your car. It may take a few hours, but it will be worth it when you get to enjoy the cool air inside.
The summer is coming and it’s time to start thinking about how you’re going to stay cool. One way that many people choose is by installing a portable air conditioner